Skip to navigation Skip to main content

Standard line - technical details

 STRUCTURE 

A metal structure is an assembly of metal whose purpose is to support the constraints of the building and any external constraints, such as wind, snow and seismic activity. For each external constraints there is a maximum value supported by the structure. It is the same building constraints (maximum number of floors, maximum operating expenses, etc ....). Here is a view of both TS and TD structures related to the standard range.

Structure is mainly composed of three types of rooms: the key pieces that support all efforts / secondary parts that do not support that part of the efforts and trim parts, used for sealing or fixing components. All structures have the same logic and switching

 

 WALL 

The second item that characterizes our products and our range is the outer wall. Economy The range is performed with panel systems. These panels are attached to the structure and interlocking screws. They consist of a wooden frame, which we kind of insulation glass wool. Part of the panel to the outside will be dressed in a painted galvanized steel sheet. The inner part of a delaminated plate wood, coated with white gloss paint. The windows are built and attached to the panels. For this, the panels are cut to size and cons of a system framework will be used to allow binding and optimum quality. Structure FP-A is equipped with sandwich panels composed of PU foam, metal panels embossed PVC exterior panels and white on the inside. Once the panels are installed, a plastic used to make the connection and hide our way of wall construction. The diagram below shows a section of the wall structure with wood panels and the connecting piece. Wall panel system for maximum flexibility and the ability to reconfigure the product after each use. More damaged panels can change quickly. The thermal insulation provided will be a limit and will not be compatible with the standards heavier. The junction between two panels created a linear thermal bridge. The insulation can be optimized to cancel the phenomenon of thermal bridges, with a system of "outer skin" insulating cladding as insulated panels for example.

 

 ROOF 

Once the panels are installed, a plastic used to make the connection and hide our way of wall construction. The diagram below shows a section of the wall structure with wood panels and the connecting piece.

Wall panel system for maximum flexibility and the ability to reconfigure the product after each rental. More damaged panels can change quickly.

The thermal insulation provided will be a limit and will not be compatible with the standards heavier. The junction between two panels creates a linear thermal bridge. The insulation can be optimized to cancel the phenomenon of thermal bridges, with a system of "outer skin" insulating cladding as insulated panels for example.

 FLOOR 

The Standard range of products offer a roofing system called dry with a flow of water through the corners, the four corners of the module. A roof structure is mainly composed of four beams, pieces of angle type Isobox technology (similar to maritime containers), joists used to support the load on the roof (like snow or a person for maintenance), Standard insulating glass wool placed between the joists and 0.6mm plates used to cover the whole.

Efforts related to the weight of the snow will be taken by the system of joists. It is the same for the weight of any individual to perform maintenance operations.
The flow of water through the rails will, also serving as gutters. The water is then discharged through holes in the corner pieces to flow Isobox finally into tubes. The final disposal will be the 4 corners bottom of the module, they can be connected with the foundation drainage system of rainwater client.
The structure of the roof, for this range, allows an individual to a maximum weight of 120kg to walk over. The maintenance and installation of equipment may therefore be more easy with a lifeline and directly through the roof.
    

 

  • Online dopyt