Skip to navigation Skip to main content

Economy line - technical details

 STRUCTURE 

A metal structure is an assembly of metal whose purpose is to support the constraints of the building and any external constraints, such as wind, snow and seismic activity. For each external constraints there is a maximum value supported by the structure. It is the same building constraints (maximum number of floors, maximum operating expenses, etc ....). Here is a view of the three TS structures, FP and FP-EE-A related line Economy.

Structure is mainly composed of three types of rooms: the key pieces that support all efforts / secondary parts that do not support that part of the efforts and trim parts, used for sealing or fixing components. All structures have the same logic and cutting.

 

 WALL 

The second item that characterizes our products and our range is the outer wall. Economy The range is performed with panel systems. These panels are attached to the structure and interlocking screws. They consist of a wooden frame, which we kind of insulation glass wool. Part of the panel to the outside will be dressed in a painted galvanized steel sheet. The inner part of a delaminated plate wood, coated with white gloss paint. The windows are built and attached to the panels. For this, the panels are cut to size and cons of a system framework will be used to allow binding and optimum quality. Structure FP-A is equipped with sandwich panels composed of PU foam, metal panels embossed PVC exterior panels and white on the inside. Once the panels are installed, a plastic used to make the connection and hide our way of wall construction. The diagram below shows a section of the wall structure with wood panels and the connecting piece. Wall panel system for maximum flexibility and the ability to reconfigure the product after each use. More damaged panels can change quickly. The thermal insulation provided will be a limit and will not be compatible with the standards heavier. The junction between two panels created a linear thermal bridge. The insulation can be optimized to cancel the phenomenon of thermal bridges, with a system of "outer skin" insulating cladding as insulated panels for example.

 

 ROOF 

The range of products offer Economy roofing system called dry with a water flow along the walls or via a gutter option. A roof structure is mainly composed of four beams, pieces of angle type Isobox technology (similar to maritime containers), joists used to support the load on the roof (like snow or a person for maintenance), Standard insulating glass wool placed between the joists and 0.6mm plates used to cover the whole. Efforts related to the weight of the snow will be taken by the system of joists. It is the same for the weight of any individual to perform maintenance operations.
The flow of water will by natural runoff along the roof and the walls. Additional optional gutter may be added and connected to the drainage system of rainwater client. The structure of the roof, for this range, allows an individual to perform long operations maintenance or installation of equipment. It will be better if need walk only on the rails outside the module and do not walk on the central part of the roof.

 

 FLOOR 

The floor uses the same logic as the roof construction at the metal reinforcement (beams, Isobox, joists, insulation between the joists). By cons it will be covered with plate type wood or OSB CTBH to form the floor. Plates rodent will be put in place between the joists to hold the insulation and prevent access to any animal. Operating expenses will be taken through to the joists. The final water flow will be through the holes in the floor Isobox as explained above.
    

 

  • Online dopyt